Characteristics of SMD 2835 LED strip light:1) LED inlaid glass:2) Light transmission efficiency:3) LED design:4) Reflector:5) LED color:6) Typical color response time (t=1ms):7) Typical color power (p=2 W / lm or p=1.5 W / lm)8) Maximum output Power:9) LED type:10) Size: Diameter:11) Material:Electronics: Ligth:Design and specifications of DSSR 4100 series of LED strips lights.LED lamps, as a new lighting system, have been developed at DSSR and are also used in various other industry and other applications. This series of lamp has an internal material of glass, which makes them highly rigid and durable in many lighting applications.

SMD 2835 LED strip light has high flexibility and can be curled at will.SMD 2835 LED strip light can be cut, if the length is too long, you can cut off a section.- When a wire is cut as shown below, to shorten the length, you can apply crimp or solder.After applying crimp or solder, the length must be cut as shown below.Please note that the original cut length of each LED strip light may differ for every model.Please refer to the LED Model section below for the exact length after the wire cutting.- When using a TPS2714, you have to solder one female terminal at each end. For each wire, the wire must be soldered on the other terminal of the TPS2714.- Please refer to the T-3445, T-3450, and T-3548 model pages for the exact wire length before soldering.- For more details, please refer to the LED Model section below.

SMD 2835 LED strip light has good insulation and water resistance. Each strip has an LED, a power lead, and a protective cover.Stripe Type The strip lights up when the power connection from the controller is made while the strips are switched on.  A single strip can run an entire power strip well. If the power needs to be interrupted, all the lights in the strip will light up. When the power connection is re-established, any strips in the strip will light up. You need to connect all your strips and power to the same power source.Each LED has enough power to stay lit for the whole duration of the test. 

SMD 2835 LED strip light has strong weather resistance, so it can be used in outdoor environment. It has a LED strip design for optimum light distribution.This is the main light on the side of the LED strip. As it is a compact, compact device, it comes in two different size.The main body of the LED strip light has a round-cut design and a red LED (on the first side above the switch).A larger size LED strip light like the one can be seen at the left of these two images.Here you can see more detail of the LED strip light from the bottom.