SMD5050 waterproof IP68 LED strip manufacturers tell you that LED strips and LED flexible strips are emerging energy-saving products, which are not familiar to consumers. Today, SMD5050 waterproof IP68 LED strip manufacturers will lead everyone to learn and buy LEDs. Several aspects that need to be paid attention to when lighting strip products:

1. Chips used in LED flexible light strips: domestic and imported chips are available. The SMD5050 waterproof IP68 LED strip manufacturer tells you that the chip is different, and the price varies greatly. Of course, what chip is used? What kind of effect do you want to achieve? Be aware of it before purchasing.
2. LED package: SMD5050 waterproof IP68 LED strip manufacturer tells you that it is divided into resin package and silicone package. The price of the resin package is cheaper, because the heat dissipation performance is slightly worse, and the others are the same. Silicone encapsulation has good heat dissipation performance, so the price is slightly more expensive than resin encapsulation.
3. The consistency of LED color: The SMD5050 waterproof IP68 LED strip manufacturer tells you that there are many packaging factories in China, and there are thousands of large and small. Of course, there are strengths and weaknesses. There are many small packaging factories that do not have spectroscopy and color separation machines, so they either do not perform spectroscopy or are outsourced, which makes it difficult to guarantee the quality. The manufacturer of SMD5050 waterproof IP68 LED strip tells you that the color consistency of LEDs that have not been separated by color separation is poor, and the effect after lighting on the soft LED strip is not so good, of course, the price difference is relatively large.
4. LED welding effect: The assembly of LED soft light strips is divided into manual welding and machine welding. Manual welding is to use a soldering iron, and the most primitive method is used for welding. The manufacturer of SMD5050 waterproof IP68 LED strip tells you that the products produced by this operation method are ugly in appearance (the size of solder joints are inconsistent, there are many flux residues, the solder joints are not smooth, the LED package is scalded, etc.), and the second is that the electrostatic protection measures are not good. , Many LED chips are broken down, causing the phenomenon of dim light or no light when the power is turned on.
5. Machine soldering is different. Machine soldering uses reflow soldering. Not only does the product after soldering look beautiful (the solder joints are the same size, the solder joints are smooth, there is no flux residue, and the LED package is intact), but there is no chip damage. The phenomenon of static electricity burnout. At the same time, the position and direction of the LED are more beautiful. This can be seen directly from the appearance.
6. FPC material: FPC is divided into two types: rolled copper and copper-clad. The copper-clad plate is cheaper, and the rolled copper is more expensive. The pads of the copper-clad board are easy to fall off when bent, but the rolled copper will not. The manufacturer of SMD5050 waterproof IP68 LED strip tells you which material to use for FPC, it depends on the purchaser to make a decision based on the use environment.
7. Whether FPC has passed environmental protection certification, UL certification, whether LED has patent, etc. Some are certified and patented, and the prices are more expensive, while none are cheaper.
8. The brightness of the LED: the price of LEDs with different brightness is different, and the price of ordinary and high-brightness LEDs is quite different. Therefore, when purchasing, you must clearly know what kind of brightness you need, so that you can accurately locate your product.
9. The color of LED: the color is different, the price is different. White and green are more difficult to match and separate, so the price is higher than other colors; the manufacturer of SMD5050 waterproof IP68 LED strip tells you that red, yellow, blue and other colors are easier to separate, and the consistency is better, so The price is slightly cheaper. The manufacturer of SMD5050 waterproof IP68 LED strip tells you that special colors such as purple and brown are the most expensive due to color matching.