The manufacturer of LED extrusions 10235 tells you that the LED wall washer has been assembled. During the test process, it is found that the LED signal will be confused when touching the aluminum profile shell of the LED wall washer. Is this problem due to poor signal? In fact, the outside interference to the LED wall washer can come from many aspects. Among them, the capacitance of the human body, the partial pressure of the insulation resistance, etc. will interfere with the LED wall washer. The profile shell is grounded. If the problem occurs again after the shell is grounded, symptomatic diagnosis and treatment are required.

LED extrusions 10235 manufacturers tell you the advantages of extrusion technology of aluminum profiles for linear lights, which are divided into basic characteristics and technical characteristics:
Basic characteristics: materials can be joined at the same time of deformation, brittle materials can be deformed, and a cross-sectional shape that is the same as the shape of the mold outlet can be obtained through one process.
Technical characteristics: It can extrude and join metal powder, metal chips, dissimilar metals, and can form thin-walled hollow asymmetric products by using a split die. It can also process aluminum alloy materials with very low plasticity. Forming; it can form products with complex cross-sectional shapes and irregular shapes; it can process blanks whose outer layers are covered with cladding materials to prevent oxidation and surface cracks.