The manufacturer of SMD5050 waterproof IP68 LED strip tells you that there are many accessories for LED strips, such as lamp beads, wires, resistors and others. Generally speaking, the high-voltage light bar is 100 meters per roll, and the low-voltage light bar is mostly 5 meters. The manufacturer of SMD5050 waterproof IP68 LED strip tells you that you can measure the required size before we buy it, and then let the merchant cut it for you. The 1210led light bar is 60 lights, the 5050led light bar is 30 lights, and the special one is 60 lights. The manufacturer of SMD5050 waterproof IP68 LED strip tells you that if there are other special requirements, such as 50 lights per meter, this involves modifying the circuit.

The manufacturer of SMD5050 waterproof IP68 LED strip tells you that the LED strip is a more advanced cold light source. It does not radiate a lot of infrared and ultraviolet like incandescent lamps and fluorescent lamps. It has almost no current heating effect like incandescent lamps, and will not be affected by thermal expansion and contraction. And fried bubble. It will not make the bulb yellow, will not accelerate the aging of the lamp, and will not cause a greenhouse effect on the surrounding environment.
SMD5050 waterproof IP68 LED strip manufacturers tell you that different LED strip manufacturers have different specifications for LED strips. You must pay attention when choosing. The specifications mainly refer to the number of lamp beads per meter. For example, 72 means 72 lights per meter. Beads, you can choose according to your needs and hobbies. The manufacturer of SMD5050 waterproof IP68 LED strip tells you that the 1210 specification light strip has 60 LEDs per meter, the 5050 specification light strip has 30 LEDs per meter, and the special one has 60 LEDs per meter. The price of different specifications of led light bars is different, which is also an important factor to distinguish the price of led light bars.
The manufacturer of SMD5050 waterproof IP68 LED strip tells you that because it is usually a group of 3 LEDs, if it is 50 lights, it will become a group that is not enough, but if it becomes a group of two LEDs, the current-limiting resistance will be increased. Resistance value, this will cause a waste of resources. Therefore, when making customized LED strips with special requirements, you must pay attention to the number of lamp beads is a multiple of 3, so as not to cause a waste of voltage resources.
The manufacturer of SMD5050 waterproof IP68 LED strip tells you that in addition to the leakage and short-circuit of the printed board of the led strip and the metal part on the back of the strip, single and multiple leds can be short-circuited or open. You can change the lamp beads. , But the premise is that you must have the same type of led lamp beads, but also have operating experience and tools. The manufacturer of SMD5050 waterproof IP68 LED strip tells you that the tools are soldering stations and air guns. If you use an ordinary soldering iron to weld the pins at both ends of the led lamp bead, the heat dissipation on the back of the led lamp bead is not welded, and the service life of the lamp bead will not be long, because the life of the led lamp bar depends on the temperature.